Installing Freestanding Tub

Introduction

Installing freestanding tubs is an elegant addition to the bathroom of all sizes, styles, and designs. Setting up one such bathtub correctly ensures that it will last for a long time. However, doing so also requires a certain level of expertise and knowledge about bathtub installation. In this article, we discuss how to install a freestanding tub

Choosing a freestanding tub

The first step is picking a particular type of freestanding tub since there are different types out there. These are pedestal, clawfoot, and whirlpool. Each type offers a unique bathing experience. The clawfoot design, for example, offers a classic soaking experience that keeps you warm for hours. Modern styles offer whirlpool or jet features.

Installing a freestanding tub is highly flexible in terms of its installation place. Setting up a standard built-in tub, for example, requires two or more walls between where such a toilet is set up. Setting up a freestanding tub requires no additional wall. You can install one freestanding tub even beneath a window and enjoy natural lighting. The tub can also be made the main attraction of the bathroom by placing it at the center of the toilet.

Another great aspect of the freestanding tub is they have finished on all sides. This greatly facilitates the plumbers to set up this tub in any place in any direction.

However, replacing an existing tub with a freestanding tub requires rerouting your water pipes. And repositioning them can take a few days. So, your plumbers need to complete this re-routing task beforehand. However, when all the water pipes are in place, installing a freestanding tub then will be a breeze.

Besides tub what are the other tools you need to collect

• Level
• Blanket
• Cleaning Supplies
• Silicone
• Plumber’s Putty
• Caulk
• Damp Cloth

Floor preparation

Your bathroom floor is an important factor to set up a freestanding tub firmly. This is because most of these tubs are made of cast iron which is extremely heavy. However, freestanding tubs made of fiberglass are lighter. But, they do not use frequently due to their poor heat-retaining capacity unlike cast iron made freestanding tubs.

It is also important to understand the weight-bearing capacity of your bathroom floor before setting up a freestanding tub. A bathroom floor made of hardwood has definitely less weight holding capacity than a bathroom floor made of marble.

Another important thing you need to take into account is the tub filler. It is often the biggest expense during a tub installation. You must install a filler on the floor or in the ceiling. Regardless of the filter you prefer, it must be in place before the tub is installed.

The evenness of the bathroom floor is also a big matter. In no way, you can install a freestanding tub on an uneven floor.

If a tub is installed on a floor that is not level, the bathtub will be unsteady and will need to be replaced immediately. And, the replacement process will cause you additional work, money, and manpower. To avoid such hassle, you must check the condition of the bathroom floor before staring any plumbing work.

The installation process of a freestanding tub

• Choose a place inside your bathroom where you will install the tub. The most likely place will be at the center of your bathroom. But it could be at any place.
• Clear the area and make sure the place is even.
• Place the bathtub at your chosen place and lay a blanket next to it
• Move the bathtub to the blanket in such a way so that one side stays higher than another.
• Identify the drain hole area and clean it to remove dirt and debris
• Place some adhesive around the drain body and insert them through the drain hole.
• Place some putty which is a pliable substance used to make watertight seals around faucets and drains.on the washer and then glide it over the bottom of the drain body.
• Stiffen the washer to form a tight seal
• Finally, set up the drain part according to the manufacturer’s instructions.

Conclusion

Bathing in a freestanding tub is great relaxing. After a busy stressful working day what you need dearly is a relaxing shower to calm down your nerves to enjoy a sound sleep at night. The process we describe installing a freestanding tub is simple and easy to follow.

How to Use a Shower Chair

Introduction

Shower chairs provide the perfect way to bath independently for those people who are elderly or disabled. It helps the user to support and provides comfort and stability when washing, and ensures that the users can use its facility without fear of a fall.

Are you planning for buying a specialized shower chair or already bought one? The first thing you need to know is how to use it. Otherwise you can get seriously hurt.

A couple of simple tips can make your shower more enjoyable by preventing injuries. In this article, we planned to prepare brief informative tips to let you know how to use a shower chair. Keep reading.

How to use a shower chair properly?

• Accessibility

Determining how accessible the chair will be for the user is an important thing to consider.

Make sure that they can make easy and safe access to the shower and have their space to sit and maneuver comfortably.

An adapted bath can be a better option for individuals with particular access needs.

• Careful entry

Adequate space to enter the bathroom or shower unit is not enough for a careful entry.

Some more other considerations still need for that including installation of railing around the shower chair that will provide the user the correct leverage required to put themselves on and off the seat then.

• User experience

Firstly, think about the bathing experience from a user’s perspective before considering the place of a shower chair.

The water from the shower should fall correctly to the user and providing them to wash themselves easily.

• Reach

Easy access to everything including taps, shampoo, and towel while showering is essential for the user. If these essential things remain in over-reach can be a potential slip or fall hazard.

How to Shower With a Shower Chair

As you have learned showering with a shower chair, it will be less painful and even enjoyable. Follow the steps below if you or your beloved one have troubles in showering safely.

• Make sure that the shower chair is standing firmly in place by not allowing it to slide.
• Gather all your necessary things in your reach without standing up in showering
• Safety mats and towels should be placed safely. Do not bare surface with wet feet that can lead to slip.
• Do not make sudden motions which are the biggest part of learning the use of a shower chair.
• When you work with an injured or disable person, make sure you give them enough space for privacy.

Also use the shower chairs when you need help to get in or out of bathtub.

How to Use a Shower Chair Safely

Potential injuries can be reduced to a minimum when you know the safe uses of your shower chair. Feel comfortable by following these steps if you feel unsafe with your shower chair.

• The chair’s height should be adjusted so you can sit and stand up easily if you are suffering in back pain.
• Ensure that your legs are level and in contact with the surface.
• You’re recommended to use a slip-resistant mat under the chair and your feet and clear the area of any obstruction.
• Follow the weight distribution and avoid sitting on the edge of the chair.

These will be your habit in everyday routine bathing. Keep following these tips.

How to Use a Tub Transfer Bench

Although the shower benches are great for safety but it is not the best idea to use them to get in or out of the tub. Bath transfer benches are invented for this reason.

Firstly, put the part with the suction cups inside the tub. Place it on the end of the straight part of the tub. The other two legs will be resting firmly on the outside of the tub.

After making sure that the bench is not moving, back up to the bench and sit on it. Now slowly rotate your body and put your feet inside it.

Make sure that you’ve placed the bench with you facing the faucet. So, you are recommended to transfer benches that have backrests too. It may seem silly but it is a common mistake to make.

I hope that you know how to use a shower chair correctly, as well as other bathroom aides. Some serious injuries are easily preventable if you just take a bit more caution.

Conclusion

Hopefully, you’ve learned how to use a shower chair safely and correctly. If you follow the cautions, some serious injuries can be easily preventable.

Visit toiletsguide.com for more help.

Suggested Sources

https://teakshowerbenches.net/how-to-use-a-shower-chair-correctly/

https://medium.com/@Kingkraft26D/how-to-use-a-shower-chair-safely-4fdd5bf9e4ef

https://www.caregiver-aid.com/shower-chair-use/

How to Adjust Dual Flush Toilet

Introduction

If you are concerned about the environment and want to use less water, Dual flash toilets are great for you. You can also save your money on water bill.

A button is mounted on the top of the tank of these toilets that lets you pick the size of your flash. The older toilets used 5 gallons water per flush; on the other hand, the modern dual flush toilets use at most 1.6 gallons. This is where the savings come from.

It’s difficult to learn how to adjust a dual flash toilet but this is something that the owner of any of these eco-friendly toilets must face at one time or another. Let's dig into it

How to Adjust Dual Flush Toilet - Step by Step Guide

1.   Remove the Dual Flush Toilet Lid

In most of these types of toilets, unscrew the push button that is located on the top of its lid before you can lift off. Unscrew the button anticlockwise.

I didn’t work? The button doesn’t want to unscrew? Press on one of the flush buttons down to pry off the opposite button from underneath.

Now do the same process for the first flush button. This should be able to unscrew now.

2.   Adjust the Level

It’s pretty simple to adjust the water level in a dual flush toilet. An integrated float assembly is used in these toilets that helps raise and lower the water level to control the flow of water. The ring shaped device that fits around the fill valve in the left-hand side of the toilet is the float.

Depending on the valve, there are two ways available to adjust the level.

The first one is by a screw that sits on top of fill valve assembly. Clockwise tightening lowers the water and loosing it anticlockwise makes the float to rise higher as the tank fills.

The other one way to adjust the water level is to press together the two sides of the lock that attach the float valve to the fill valve assembly rail mounted on the side.

3.   Flush the Toilet

Press down on one button on top of the flush valve in the center of the toilet to flush the toilet. Water will refill after exiling the tank.

Now check the new level if it is still not at the accurate level, start next adjustments and check by flushing as necessary

4.   Finishing

Once you are satisfied with the new water level, it’s now time to replace the lid. The dual flush assembly should be screwed back and pressed the buttons into place if you’ve removed them.

Now you are done adjusting your dual flush toilet. Use the same process to other dual flush toilets if needed.

Conclusion

Hopefully you have done learning how to adjust your dual flush toilet. If you didn’t know the processes, you have to spend money for any professional for a little task.

You’re recommended not to use more water than you need. In any complex problem in your dual flush toilet, call a professional to fix. Take help online from the site toiletsguide.com for any toilet related problems.